Robotic Pool Cleaner
Beatbot AquaSense® 2 Ultra Robotic Pool Cleaner
The World's First AI-Powered 5-in-1 Robotic Pool Cleaner
$3,150.00 $3,550.00
Beatbot AquaSense® 2 Pro Robotic Pool Cleaner
The Industry-Leading 5-in-1 Robotic Pool Cleaner
Beatbot AquaSense® 2 Robotic Pool Cleaner
The World's First 3-in-1 Robotic Pool Cleaner with Water Surface Parking
$1,099.00 $1,599.00
Beatbot AquaSense® Pro Robotic Pool Cleaner
The World's First 5-in-1 Intelligent Pool Cleaning Robot
Beatbot iSkim® Ultra Robotic Pool Skimmer
Solar-Powered Intelligent
Product Parameters
For AquaSense 2 Ultra
For AquaSense 2 Pro
For AquaSense 2
For AquaSense Pro
For AquaSense
For iSkim Ultra
AquaSense 2 Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steels and more.
AquaSense 2 Ultra is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPM. We have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 Ultra is a home swimming pool cleaner that can clean pools with an area of up to 320 square meters (3,444 square feet) in a single cycle. If your pool is larger than this, it can still be cleaned, but the process may take more than one cycle. When the battery power drops below 15%, the robot will resurface next to the pool edge, you need to recharge it untill it can continue cleaning, and place the robot near the area of the pool that has not been cleaned yet.
AquaSense 2 Ultra comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Ultra is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense Ultra can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.If you have concerns or want to reduce the water depth limit, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
AquaSense 2 Ultra will clean corners during edge exploration and planned cleaning.
Up to 10 hours Continuous Runtime for Surface CleaningUp to 5 hours Continuous Runtime for Floor CleaningUp to 4.5 hours Continuous Runtime for Walls + Waterline Cleaning
The battery capacity of the AquaSense 2 Ultra is 13400mAh，but the AquaSense 2 Ultra only take 4.5h to fully charge.
AquaSense 2 Ultra supports Dual Connectivity - 5G/2.4G WiFi or 2.4G Bluetooth
Users can remotely control AquaSense 2 Ultra and switch modes through the app, but only when operating on the water surface
AquaSense 2 Ultra use a Clarifying Agent Kit which is the same as the previous ones.
The battery capacity is 13,400 mAh. Typically, the robot can be fully charged in about 4.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro has efficient cleaning capabilities that can effectively remove passing garbage and algae. However, some algae are very slippery and have strong grip, AquaSense 2 Pro may not be able to remove them directly. In this case we suggest spreading algae removal agents in the water first. After the algae are deactivated, use our machine to remove them in conjunction with the swimming pool circulation system.
AquaSense 2 Pro is designed for swimming pools with a working depth in the range of 0.5–3 m and up to 0.4m for shallow end or Baja shelf.
AquaSense 2 Pro can work in a depth range of 0.5 to 3 meters. While most pool cleaning robots cannot clean steps, AquaSense 2 Pro/AquaSense can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.4 meters. We will also continue optimizing step-cleaning functions.
AquaSense 2 Pro can draw a pool map in most cases, but if the bottom and walls of your pool are curved, ultrasonic waves may be reflected upwards at the bend and cannot be received by the machine, so there is a possibility that it cannot be drawn in this situation
Users can remotely control the machine through the app, but only on the water surface
AquaSense 2 Pro can remotely return to the shore through the APP during the cleaning the water surface.
The battery capacity is 10000 mAh. Typically, the robot can be fully charged in about 3.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPMBut don't worry, we have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 can clean the walls and water lines of infinity pools, but it cannot clean the water surface.
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense 2 can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.We will also continue to optimize the function of step cleaning, such as reducing the water depth limit, improving cleaning capabilities, etc. If you want to experience it, you only need to upgrade its firmware.If you have concerns, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
0.5m-3m / 1.6ft-9.8ft
AquaSense 2 can switch modes in water or on shore through the app
AquaSense 2 cannot be controlled to return through the APP during the cleaning process
AquaSense 2 can automatically recognize obstacles and avoid them, the obstacle avoidance function of which is the same as AquaSense Pro
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
AquaSense Pro comes with a two-layer filter that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
Aquasense Pro can complete water surface cleaning for up to 9.5 hours or pool bottom cleaning for up to 5 hours in a single charging cycle.The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
AquaSense Pro can work with beach entry pools as long as the water depth is over 1.6ft, as AquaSense Pro is designed to operate within a depth range of 1.6ft to 9.8ft. If the water depth is less than 1.6ft, then the robot will return to the water of deep side.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense Pro is 3.7L.
AquaSense Pro is equiped with 10,400mAh battery and it requires only 3.5 hours for a full recharge. The charging time may longer when temperature is below 77℉.
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
AquaSense can support cleaning time of up to 3.5 hours in quick mode (bottom cleaning) and 2.5 hours in standard mode (bottom + walls cleaning). The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense is 2L.
AquaSense is equiped with 6700mAh battery and needs about 3hrs charging. The charging time may longer when temperature is below 77℉.
Currently, the device's networking WiFi only supports 2.4GHz. Dual-band WiFi that supports both 5GHz and 2.4GHz is also compatible. If your home WiFi is currently set to 5GHz only, you can contact your router service provider to enable 2.4GHz.
The Beatbot iSkim Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more.
iSkim Ultra is suitable for use in saltwater pools. Beatbot takes into account the presence of salt and chlorine in the water when designing its products. We use highly corrosion-resistant materials and processes to ensure the durability of our products. Our product can be safely used in saltwater with a concentration not exceeding 5000 ppm and a chlorine content not higher than 4 ppm.
Yes, iSkim Ultra can work well with Infinity pool.
iSkim Ultra is highly effective in removing hair, leaves, branches, flowers, grass, seeds, pollen, and other vegetation, as well as small insects or animals. It can filter debris as small as 380 micrometers (μm).
The iSkim Ultra comes equipped with a magnetic wireless charger. Using this charger, it takes approximately 5 hours to fully charge. Additionally, our device features a solar panel, allowing for convenient solar charging.
Please rest assured that our product has a wide voltage and can adapt to 100V to 240V.
The filter basket's capacity of iSkim Ultra is 9L.
Yes, you can easily maneuver the machine to move the robot forward, backward, left, and right based on your preferences.
How to Achieve Pool Cleaning Success
Not only is a clean pool necessary for safe swimming, but it also prolongs the lifespan of equipment. Understanding the options and process, whether you do it yourself or hire a pool cleaning service, allows you to make a more rational decision.
Importance of Pool Cleaning
The water in a clean pool is crystal clear and free from nasty algae or bacteria. Cleaning regularly relieves strain on your pump and filter, lowering chemical costs and avoiding expensive repairs. All pools need to be cleaned from time to time, and pool owners everywhere must realize that failing to do so might result in cloudy water or damaged equipment.
DIY Pool Cleaning or Pool Services?
Whether you clean your pool yourself or call in professionals depends on the time and money you have to spend, as well as what your pool requires.
Cleaning it yourself saves money because all you need are skimmers, brushes, and test kits, costing $50 to $200. You have control over when and how it is cleaned, presenting it according to your pool’s needs. Most owners become pool maintenance pros. However, it takes time (1 to 3 hours per week, depending on the size of your pool), and you need to know about water chemistry and equipment maintenance. Scrubbing and vacuuming can also be labor-intensive, especially in larger pools.
Hiring a professional service means you do not have to handle anything; technicians do everything and save you time. Experts keep water chemistry in balance, maintain equipment, and catch problems before they become costly repairs. This is suitable for busy homeowners or pools receiving heavy use. Nonetheless, it ranges from $80 to $200 a month, and to assume less work, you give up control of the means or timing. Not all service providers are created equal, so research before hiring one.
Choosing the Right Approach
The decision depends on your pool’s size and how you use it. If your pool is less than 20,000 gallons and sees light use, DIY cleaning is effective. Professional services become a good choice, especially if your pools are larger or used frequently. The area around your pool is also pivotal. Trees or dust around the pool result in extra particles to be eliminated regularly. For light debris, DIY is possible, but heavy algae or grease buildup might be best suited for a professional.Your budget and time determine plenty. With a small budget and ample time, DIY works. If you are short on time or like a no-fuss experience, hiring a professional is worth the price. If you want to save that DIY dollar, you need to learn how to test water chemistry (pH, chlorine, etc.) and maintain equipment. If this sounds daunting, professionals step in to rescue you.
DIY Your Own Pool Cleaning
For the do-it-yourself route, buy the right tools: a skimmer net, pool brush, vacuum head with hose, telescopic pole, and water testing kit, available for $50 to $150 at pool supply stores. Follow these steps to get that shiny pool.
Skim and Remove Debris
Remove debris like leaves, insects, and floating material from the pool surface with a skimmer net on a telescopic pole. Skim daily or every few days, especially in windy or leafy areas, where debris left sitting on the surface will likely settle to the bottom or get caught in the filter. It requires 5 to 10 minutes per session, keeping the pool looking its best.
Brush Pool Surfaces
Scrub walls, stairs, and corners to loosen algae, dirt, or stains with a pool brush on a telescopic pole. Use a nylon brush on vinyl or fiberglass pools and a stainless-steel brush on concrete pools. Focus on spots with lower circulation, like corners or behind ladders. Weekly brushing for 10 to 20 minutes stops possible algae from developing and making a home in your pool.
Vacuum the Pool
Attach a vacuum head to a telescopic pole and hose, remove the basket in the skimmer, and attach the hose there. Vacuum the floor in slow, continuous lines, with each line slightly overlapping the one before, to remove debris and dirt effectively. For a high-tech, less-hassle option, consider the Beatbot AquaSense 2 Series: a cordless robotic pool cleaner that cleans pool walls, floors, waterlines and even the water surface with smart navigation, and a long battery life to make cleaning less work. Keep the skimmer basket emptied to maintain suction. Vacuuming the pool bottom weekly takes 20 to 40 minutes, depending on size.
Check Water Parameters and Make Adjustments
Use a water test kit to check the pH level (which should be 7.2 to 7.6), chlorine (1 to 3 ppm), and alkalinity (80 to 120 ppm). Balance levels using chemicals such as chlorine tablets or pH increaser/decreaser per product instructions. Algae prevention and safe swimming depend on weekly testing, which takes 5 to 10 minutes.
Clean the Filter
Based on usage, clean the pool filter every one to two months. Remove cartridge filters, rinse them with a pressure hose, or soak them in a filter cleaning solution ($15 to $50). For sand or DE filters, backwash by reversing water through the filter until it runs clear (2 to 3 minutes is sufficient). Your pump is designed to run at a specific flow rate, and clogged filters can block water flow, straining your pump.
Tips for Cleaning Your Own Pool
Scoop the surface every day and brush or vacuum weekly to stop organic buildup. Store tools in a dry, shaded place to prevent damage. Abide by chemical safety rules, wear gloves, and lock products up. Monthly inspection of equipment like pumps and filters for wear avoids expensive repairs. If algae or cloudy water persists, test the water thoroughly or consult a professional.