Robotic Pool Cleaner
Beatbot AquaSense® 2 Ultra Robotic Pool Cleaner
The World's First AI-Powered 5-in-1 Robotic Pool Cleaner
$3,150.00 $3,550.00
Beatbot AquaSense® 2 Pro Robotic Pool Cleaner
The Industry-Leading 5-in-1 Robotic Pool Cleaner
$2,199.00 $2,899.00
Beatbot AquaSense® 2 Robotic Pool Cleaner
The World's First 3-in-1 Robotic Pool Cleaner with Water Surface Parking
$1,099.00 $1,599.00
Beatbot AquaSense® Pro Robotic Pool Cleaner
The World's First 5-in-1 Intelligent Pool Cleaning Robot
Beatbot iSkim® Ultra Robotic Pool Skimmer
Solar-Powered Intelligent
Product Parameters
For AquaSense 2 Ultra
For AquaSense 2 Pro
For AquaSense 2
For AquaSense Pro
For AquaSense
For iSkim Ultra
AquaSense 2 Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steels and more.
AquaSense 2 Ultra is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPM. We have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 Ultra is a home swimming pool cleaner that can clean pools with an area of up to 320 square meters (3,444 square feet) in a single cycle. If your pool is larger than this, it can still be cleaned, but the process may take more than one cycle. When the battery power drops below 15%, the robot will resurface next to the pool edge, you need to recharge it untill it can continue cleaning, and place the robot near the area of the pool that has not been cleaned yet.
AquaSense 2 Ultra comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Ultra is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense Ultra can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.If you have concerns or want to reduce the water depth limit, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
AquaSense 2 Ultra will clean corners during edge exploration and planned cleaning.
Up to 10 hours Continuous Runtime for Surface CleaningUp to 5 hours Continuous Runtime for Floor CleaningUp to 4.5 hours Continuous Runtime for Walls + Waterline Cleaning
The battery capacity of the AquaSense 2 Ultra is 13400mAh，but the AquaSense 2 Ultra only take 4.5h to fully charge.
AquaSense 2 Ultra supports Dual Connectivity - 5G/2.4G WiFi or 2.4G Bluetooth
Users can remotely control AquaSense 2 Ultra and switch modes through the app, but only when operating on the water surface
AquaSense 2 Ultra use a Clarifying Agent Kit which is the same as the previous ones.
The battery capacity is 13,400 mAh. Typically, the robot can be fully charged in about 4.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro has efficient cleaning capabilities that can effectively remove passing garbage and algae. However, some algae are very slippery and have strong grip, AquaSense 2 Pro may not be able to remove them directly. In this case we suggest spreading algae removal agents in the water first. After the algae are deactivated, use our machine to remove them in conjunction with the swimming pool circulation system.
AquaSense 2 Pro is designed for swimming pools with a working depth in the range of 0.5–3 m and up to 0.4m for shallow end or Baja shelf.
AquaSense 2 Pro can work in a depth range of 0.5 to 3 meters. While most pool cleaning robots cannot clean steps, AquaSense 2 Pro/AquaSense can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.4 meters. We will also continue optimizing step-cleaning functions.
AquaSense 2 Pro can draw a pool map in most cases, but if the bottom and walls of your pool are curved, ultrasonic waves may be reflected upwards at the bend and cannot be received by the machine, so there is a possibility that it cannot be drawn in this situation
Users can remotely control the machine through the app, but only on the water surface
AquaSense 2 Pro can remotely return to the shore through the APP during the cleaning the water surface.
The battery capacity is 10000 mAh. Typically, the robot can be fully charged in about 3.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPMBut don't worry, we have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 can clean the walls and water lines of infinity pools, but it cannot clean the water surface.
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense 2 can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.We will also continue to optimize the function of step cleaning, such as reducing the water depth limit, improving cleaning capabilities, etc. If you want to experience it, you only need to upgrade its firmware.If you have concerns, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
0.5m-3m / 1.6ft-9.8ft
AquaSense 2 can switch modes in water or on shore through the app
AquaSense 2 cannot be controlled to return through the APP during the cleaning process
AquaSense 2 can automatically recognize obstacles and avoid them, the obstacle avoidance function of which is the same as AquaSense Pro
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
AquaSense Pro comes with a two-layer filter that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
Aquasense Pro can complete water surface cleaning for up to 9.5 hours or pool bottom cleaning for up to 5 hours in a single charging cycle.The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
AquaSense Pro can work with beach entry pools as long as the water depth is over 1.6ft, as AquaSense Pro is designed to operate within a depth range of 1.6ft to 9.8ft. If the water depth is less than 1.6ft, then the robot will return to the water of deep side.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense Pro is 3.7L.
AquaSense Pro is equiped with 10,400mAh battery and it requires only 3.5 hours for a full recharge. The charging time may longer when temperature is below 77℉.
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
AquaSense can support cleaning time of up to 3.5 hours in quick mode (bottom cleaning) and 2.5 hours in standard mode (bottom + walls cleaning). The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense is 2L.
AquaSense is equiped with 6700mAh battery and needs about 3hrs charging. The charging time may longer when temperature is below 77℉.
Currently, the device's networking WiFi only supports 2.4GHz. Dual-band WiFi that supports both 5GHz and 2.4GHz is also compatible. If your home WiFi is currently set to 5GHz only, you can contact your router service provider to enable 2.4GHz.
The Beatbot iSkim Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more.
iSkim Ultra is suitable for use in saltwater pools. Beatbot takes into account the presence of salt and chlorine in the water when designing its products. We use highly corrosion-resistant materials and processes to ensure the durability of our products. Our product can be safely used in saltwater with a concentration not exceeding 5000 ppm and a chlorine content not higher than 4 ppm.
Yes, iSkim Ultra can work well with Infinity pool.
iSkim Ultra is highly effective in removing hair, leaves, branches, flowers, grass, seeds, pollen, and other vegetation, as well as small insects or animals. It can filter debris as small as 380 micrometers (μm).
The iSkim Ultra comes equipped with a magnetic wireless charger. Using this charger, it takes approximately 5 hours to fully charge. Additionally, our device features a solar panel, allowing for convenient solar charging.
Please rest assured that our product has a wide voltage and can adapt to 100V to 240V.
The filter basket's capacity of iSkim Ultra is 9L.
Yes, you can easily maneuver the machine to move the robot forward, backward, left, and right based on your preferences.
Everything You Need to Know About Pool Filter Cleaners
Pool filters are an essential part of maintaining cleanliness in your pool, and pool filter cleaners help them work efficiently. They include manual cleaning devices, chemical solutions, or high-tech automated systems that scrub and clean dirt, algae, oil, and other debris that accumulates and clogs your filter so that your pool water sparkles and your pump does not burn out.
The Importance of Using a Pool Filter Cleaner
Pool filters (cartridge, sand, or diatomaceous earth (DE)) trap every particle of dirt suspended in the water and keep your pool clean and safe. But when dirt, algae, or sunscreen clogs filters, less water can pass through, meaning a pump that has to work overtime—a potentially costlier fix. Even worse, cloudy pool water turns into a paradise for algae and bacteria. A pool filter cleaner minimizes contaminant deposits, resulting in less workload for your pool pump and reducing chemical costs, therefore saving you money. It helps keep your filter clean so it can operate at maximum efficiency. This is like a checkup for your filter, so you can swim at any time you want.
Types of Pool Filter Cleaners
Handheld Cleaning Tools
If you are in the do-it-yourself crowd, these tools are certainly your friends. Hose-attached filter combs, cleaning sticks, or high-pressure nozzles easily flush debris from cartridge filters or backwash sand and diatomaceous earth (DE) filters. These tools are fairly cheap ($10-$60) and great for small pools or pool owners who don’t mind putting in time for cleaning. While easy to use and able to be used handheld, you need to be careful to clean every crevice of the filter. They are especially equipped for light debris such as dust and leaves, making them one of the best tools for daily maintenance.
Cleaning Chemicals
Cleaning solutions for cartridge, sand, or diatomaceous earth filters are usually in either liquid or powder form and are formulated to break down oil, grease, and mineral deposits. These range from $15 to $100 per bottle or canister and work well for cleaning filters choked with algae, sunscreen, or lotion. This can be helpful when your pool is in heavy use or if you have hard water, for example. There is a soaking period by immersing the filter in the agent, or you can introduce the solution during backwashing, which takes around 1 to 4 hours. The effect is definitely visible, and the filter can be restored to new condition after some waiting, making it very practical for pools with higher use frequency.
Automatic Cleaning System
Want to be fully hands-free? Then you can opt for an automatic cleaning system, for example, a piped backwash system or a robotic filter cleaner, which takes the task off your mind. They are priced between $150 and $1,200 and are ideal for larger pools or individuals who lead a busy lifestyle and cannot maintain the pool regularly. In some systems, the units are directly connected to the pool pipes, while others run independently, with sensors that detect a clogged filter and enter a self-cleaning cycle. It is a time-saver and labor-saver—more expensive, yes, and occasional maintenance is to be expected for those complicated-piped pools or families that swim regularly.
Guide to Choosing the Right Cleaner for Your Pool Filter
Match Your Filter Type
Before you start, the first thing to figure out is the kind of filter you have. For cartridge filters, this is typically done with a chemical soak or high-pressure water jet to clean the pleats, whereas sand or DE filters will generally need a backwashing accessory or a self-cleaning system. For filters that need to eliminate tiny contaminants like algae spores, the most effective chemical cleaners are generally enzyme- or acid-based products. Handheld or automatic water jet cleaning tools can easily clear away stubborn debris such as leaves as well.
Consider the Area Surrounding the Pool
Do you have trees above your pool, or is your region really dusty? To remove large quantities of dirt particles, a high-pressure cleaner or a fully automated system with a large rinse cycle is required. If swimmers leave sunscreen or oils in your pool, chemical cleaners are your safest bet, as grease buildup can be difficult to get rid of. If your pool is smaller (less than 30 feet) and is not used often, a handheld cleaning tool may be a better fit.
Emphasize Usability and Compatibility
Choose a cleaner based on your routine. For any handheld cleaner, attachment points of the hose and handgrips should be comfortable. Chemical solutions must include detailed directions for usage and be stored in containers that cannot be tampered with and are secure. Automated systems should be easy to install and operate (through a timer or phone app) and compatible with your pool water type (chlorine or saltwater) and plumbing system. Corded machines can be heavy but powerful, though they may be cumbersome to use; cordless machines address this but usually won’t finish a large pool on a single charge before needing to recharge.
What Sets the Top Pool Filter Cleaners Apart
Results-Driven Deep Cleaning
From tiny algae to greasy grime, they eliminate it all. Handheld tools feature an adjustable nozzle for targeted rinsing, while chemical solutions depend on eco-friendly enzymes or citric acid that are effective at breaking down clogs without damaging the filter. Automated systems initiate a staged cleaning cycle—water jets rinse every fold of a cartridge, brushes scrub every particle of dirt, and sensors tell the system when to backwash the sand filter—all to keep your filter operating at peak efficiency.
Durable and Safe
Good cleaners are designed to last, since pools contain plenty of water and many harsh chemicals. Handheld tools are rust-proof stainless steel or tough plastic, and chemical treatments are biodegradable and non-harmful. Mains-powered devices come with IP68 waterproof ratings, safety certifications such as UL, and auto-off features to prevent overcleaning—protecting your filter and extending its lifespan.
Green and Efficient Use of Resources
Good cleaning products are nature-friendly. More and more chemical solutions are turning to natural ingredients to decrease the need for harsh chemicals, providing a cleaner and healthier swim. Automated systems use water-saving measures in efficient flushes, and backwash water can be reused when needed, which means you can have a clean pool and save the environment.
Reliable Support to Simplify Maintenance
Consider extended warranties of up to 1-3 years with the best models for additional peace of mind. They mostly have guides, online videos, or a customer support line to help with setup or troubleshooting. Certain automated systems come with an app that reminds you when to run a cleaning cycle or service the filter, so it does the work for you with minimal effort on your part.