Beatbot AquaSense 3: Smarter Pool Cleaning with 2D Mapping and AI Debris Detection

By Beatbot PoolRobot

Table of contents

Beatbot AquaSense 3 takes robotic pool cleaning beyond random movement and fixed cleaning routes. Combining 2D pool mapping, AI vision and intelligent navigation, it understands the pool layout, recognises over 40 types of debris, and actively hunts down visible dirt. During a full floor-cleaning cycle, it first targets detected debris, cleans along the pool edges, follows a systematic S-shaped path, and performs an AI Final Check to identify and clean remaining visible debris. For smaller jobs, such as a few leaves scattered across the pool floor after a windy day, AI Quick Clean goes directly after visible debris without running the full-floor cleaning route, reducing cleaning time by up to 50% compared with Standard Floor Mode.

What Makes Beatbot AquaSense 3 Stand Out?

AquaSense 3 focuses on three improvements that make a real difference: knowing where to clean, recognising what needs cleaning, and reaching shallow areas that conventional cleaning routines may miss.

From Sense: Precise 2D Pool Mapping for More Efficient Coverage

Unlike robotic pool cleaners that move randomly, AquaSense 3 uses front and right Time-of-Flight (ToF) sensors to detect pool boundaries and build a 2D map of the pool floor. It uses this map to plan systematic S-shaped cleaning routes, reducing repeated passes and missed areas. This is particularly useful for kidney-shaped and freeform pools, where irregular boundaries make consistent floor coverage more challenging.

After each cleaning cycle, you can view the generated 2D pool-floor map and cleaning path in the Beatbot App, making the cleaning process more transparent. The map covers the pool floor only and becomes available after cleaning rather than updating live underwater.

To Act—AI Efficient Clean: Go Straight to the Debris, Skip the Full Clean

AquaSense 3 uses a front AI camera to recognise over 40 types of pool-floor debris, including leaves and fruit. Instead of relying solely on a preset cleaning route, its AI Vision identifies visible dirt and directs the robot towards areas that need attention. It offers two cleaning approaches depending on how much cleaning your pool needs:

  • AI Quick Clean — AI Debris Hunting for Faster, Targeted Cleaning:

When only a few leaves or patches of dirt need cleaning, AquaSense 3 actively hunts for visible debris without completing a full-floor cleaning route. This reduces cleaning time by up to 50% compared with Standard Floor Mode, making it useful for quick touch-ups before swimming or after windy weather.

  • Full Floor Cleaning — AI Hunting & Final Check for More Complete Coverage

For a thorough clean, AquaSense 3 first hunts for visible debris, cleans along the pool edges, and follows a systematic S-shaped path for complete floor coverage. Finally, AI Final Check scans for remaining visible debris and targets spots that need additional cleaning, reducing missed dirt and manual touch-ups.

Shallow-Platform Cleaning from Just 18 cm Deep

While some robotic pool cleaners require 20–30 cm of water to clean sun shelves, AquaSense 3 can clean compatible shallow platforms in just 18 cm of water. That means less manual brushing on shallow lounging areas where sand, leaves and dirt often collect. Its dedicated Shallow Platform Mode uses two downward-facing ultrasonic sensors to detect edges and drop-offs, helping the robot adjust its movement and avoid falling into deeper water. Whether you're dealing with wind-blown sand or debris left after a busy pool day, AquaSense 3 extends automated cleaning to shallower areas that some other robots cannot reach. Compatibility depends on platform dimensions, slope and edge configuration.

How Does Beatbot AquaSense 3 Make Everyday Pool Cleaning Easier?

AquaSense 3 combines powerful debris pickup, flexible cleaning modes, fine filtration and automatic surface parking to reduce manual work throughout a cleaning cycle.

6,800 GPH Water Flow and Four Active Brushes

A brushless pump delivers up to 6,800 GPH (26 m³/h) of water flow for collecting leaves, sand and everyday debris. Four rotating roller-brush sections loosen dirt from pool surfaces, while dual caterpillar tracks support traction and stable wall climbing.

3 L Debris Basket with 100 μm Filtration:

The large basket collects leaves, sand and other debris during longer cleaning sessions. The standard 100 μm filter handles routine cleaning, while an optional 3 μm fine filter (sold separately) provides finer filtration for smaller particles that may pass through the standard mesh.

Automatic Return and Surface Parking

After cleaning or when battery level drops below 15%, AquaSense 3 returns towards its original entry point and floats at the water surface for easier pickup. If it drifts out of reach, you can use the Beatbot App to bring it back towards the pool edge, provided it is already floating and connected. There's no need to locate or retrieve the robot from the pool floor.

Up to 5 Hours of Cleaning per Charge

Its 10,000 mAh battery supports up to 5 hours in Floor Mode or 4.5 hours of floor, wall and waterline cleaning, with a maximum cleaning area of approximately 300 m² (3,229 sq. ft.) under specified conditions. The included charging dock recharges the robot in up to five hours.

Six Cleaning Modes for Different Tasks

Standard Mode cleans the floor, walls and waterline; Floor Mode focuses on the bottom; AI Quick Clean targets visible debris; and Shallow Platform Mode handles compatible sun shelves. ECO Mode supports scheduled floor maintenance every other day, while Custom Mode lets you adjust supported cleaning areas and settings. The Beatbot App also provides cleaning history, completed pool-floor maps, status information and software updates.

Beatbot AquaSense 3 Specifications at a Glance

Specification Beatbot AquaSense 3
Product type Cordless robotic pool cleaner
Cleaning coverage Floor, walls, waterline and compatible shallow platforms
Pool mapping 2D pool-floor mapping with planned-path navigation
AI debris recognition 40+ pool-floor debris types
AI cleaning functions AI Quick Clean and AI Final Check
Minimum shallow-platform depth 18 cm
Shallow-platform sensing Two downward-facing ultrasonic sensors
Rated pump water flow 6,800 GPH (26 m³/h)
Active brushing Four roller-brush sections, two front and two rear
Filter basket 3 L
Standard filtration 100 μm
Optional fine filtration 3 μm, sold separately
Maximum cleaning area Up to 300 m²
Battery capacity 10,000 mAh
Floor-cleaning runtime Up to 5 hours
Floor, wall and waterline runtime Up to 4.5 hours
Charging method Wireless charging dock
Charging time Up to 5 hours
Connectivity 2.4 GHz / 5 GHz Wi-Fi and Bluetooth
Robot weight Approximately 10.1 kg
Dimensions Approximately 45.1 × 43.5 × 23.3 cm
Supported pool types Compatible above-ground and in-ground pools
Warranty 3 years, subject to regional terms

AquaSense 3 supports a range of pool shapes, including rectangular, round, kidney-shaped and freeform designs, as well as compatible surfaces such as concrete, ceramic tile, mosaic, vinyl liner, reinforced PVC and fibreglass.

For pools with unusual floor transitions, narrow platforms or steep ledges, check the specific compatibility requirements rather than relying on pool size alone.

Is Beatbot AquaSense 3 Worth It?

AquaSense 3 is worth considering if you want a pool robot that does more than follow the same cleaning route every time. Its biggest advantage is being able to adapt the cleaning task to what your pool actually needs.

Here's where you'll notice the difference:

  • Less waiting for small cleaning jobs. If a few leaves or patches of dirt are the only problem, AI Quick Clean can target visible floor debris without requiring a full cleaning cycle. That's particularly useful when you want the pool ready for an afternoon swim.
  • Less cleaning left for you. 2D mapping helps organise floor coverage, AI Final Check targets remaining visible dirt, and dedicated shallow-platform cleaning reaches compatible sun shelves from 18 cm deep. That means fewer areas to revisit with a manual vacuum or brush.
  • Easier cleaning from start to finish. A full clean can run for up to five hours in Floor Mode, while automatic return brings the robot back to the surface afterwards. You can review the pool-floor map, check cleaning history and recharge it on the dock for next time.

The value is having a choice between a complete clean and a quick targeted clean. If your pool often collects scattered leaves, fine dirt or debris around shallow platforms, AquaSense 3 gives you more ways to deal with it without turning every cleaning job into a full-pool session.

Warranty and Availability

Beatbot AquaSense 3 comes with a three-year product warranty, subject to applicable regional terms.

The longer warranty coverage adds reassurance for a robotic cleaner designed to handle repeated cleaning cycles, from routine floor maintenance to full floor, wall and waterline cleaning.

Before purchasing, check local availability, final package contents and warranty conditions. The 3 μm fine filter is an optional accessory and is not included with the standard 100 μm filtration setup.

For a compatible pool, AquaSense 3 combines more intelligent navigation, quicker targeted cleaning and deeper shallow-platform coverage in one cordless robot.

Explore Beatbot AquaSense 3 to see how its cleaning modes and pool compatibility fit your needs.

FAQs

Can AquaSense 3 clean debris without running a full pool-cleaning cycle?

Yes. AI Quick Clean detects and targets visible debris on the pool floor without requiring a complete floor-cleaning cycle first. It is intended for quick touch-ups when only certain areas need attention. Beatbot specifies time savings of up to 50% compared with Standard Floor Mode, although results vary with pool and debris conditions.

Does AquaSense 3 create a map of my pool?

Yes. AquaSense 3 builds a 2D map of the pool floor using ToF sensors and uses that information to plan its cleaning paths. The generated map is available in the Beatbot App after cleaning. Walls and shallow platforms are not included, and it should not be described as a live underwater map.

How shallow can AquaSense 3 clean?

Its dedicated Shallow Platform Mode supports compatible platforms with water depths starting at 18 cm. Downward-facing ultrasonic sensors detect platform edges and drop-offs to help the robot adjust its movement. Check your platform's dimensions and configuration against the product instructions.

Can AquaSense 3 be used in above-ground and in-ground pools?

Yes. AquaSense 3 supports compatible above-ground and in-ground pools, including rectangular, round, kidney-shaped and freeform designs. Supported surfaces include concrete, ceramic tile, vinyl/PVC liners and fibreglass. Steps, floor transitions and shallow-platform dimensions still need to meet its compatibility requirements.

Does AquaSense 3 collect floating leaves?

No water-surface debris-skimming mode is specified. AquaSense 3 cleans the floor, walls, waterline and compatible shallow platforms. Its automatic surface parking brings the robot up for retrieval; It does not mean the robot actively skims floating leaves.

Can I bring AquaSense 3 back using the app?

Yes, once the robot is already floating at the water surface and has a suitable connection, the Beatbot App's Parking function can bring it back towards the pool edge. This function is not intended for remotely steering the cleaner underwater during a cleaning cycle.

Is AquaSense 3 suitable for saltwater pools?

It supports salt-treated pools within the specified operating limits, including salinity up to 5,000 ppm. Water temperature, pH and chlorine concentration must also remain within the approved ranges.

Is the 3 μm filter included?

No. AquaSense 3 includes a 3 L basket with a 100 μm standard filter. The optional 3 μm filter is sold separately for finer filtration.

Performance figures are based on Beatbot laboratory data. Actual cleaning coverage, runtime and time savings vary with pool configuration, debris and use. AI debris recognition is limited to the pool floor; the 2D map displays the floor only. Optional accessories and regional availability may vary.

Loading...

Your Recommended Suite

We found some models optimized for your pool profile.

Beatbot AquaSense X AI Robotic Pool Cleaner

Beatbot AquaSense X AI Robotic Pool Cleaner

Automatic Filter Cleaning with AstroRinse™ Station

AI-Powered Cleaning with HybridSense®

Complete Pool Coverage Cleaning

Why this match

Beatbot AquaSense 2 Ultra AI Robotic Pool Cleaner

Beatbot AquaSense 2 Ultra AI Robotic Pool Cleaner

HybridSense® Pool Mapping with AI Camera

Advanced AI Cruise Debris Detection

5-in-1 Cleaning Including Water Clarification

Why this match

Beatbot AquaSense 2 Pro AI Robotic Pool Cleaner

Beatbot AquaSense 2 Pro AI Robotic Pool Cleaner

5-in-1 Cleaning Including Water Clarification

Water-Surface Cleaning and Parking

11h Surface Cleaning with 13,400mAh Battery

Why this match

Beatbot AquaSense 2 Robotic Pool Cleaner

Beatbot AquaSense 2 Robotic Pool Cleaner

Complete Cleaning: Floors, Walls, Waterline

Water Surface Parking, One-Touch Retrieval

4h Floor Cleaning with 10,000mAh

Why this match

Beatbot AquaSense Pro Robotic Pool Cleaner

Beatbot AquaSense Pro Robotic Pool Cleaner

World's 1st 5-in-1 Cleaning Pool Cleaner

Water-Surface Cleaning and Water Clarification

9.5h Surface Cleaning with 10400mAh Battery

Why this match

Beatbot AquaSense Robotic Pool Cleaner

Beatbot AquaSense Robotic Pool Cleaner

Complete Cleaning: Floors, Walls, Waterline

Industry-leading Intelligent Path Optimization

3.5h Floor Cleaning with 6700mAh

Why this match

Beatbot iSkim Ultra Robotic Pool Skimmer

Beatbot iSkim Ultra Robotic Pool Skimmer

Automatic & Natural Water Clarification System

App Remote Control, Voice Broadcast

Extra-large 9L Filter Basket, 24/7 Cleaning

Why this match

Beatbot Sora 70 Robotic Pool Cleaner

Beatbot Sora 70 Robotic Pool Cleaner

Advanced Water-Surface Cleaning

Complete Pool Coverage

Smart Water-Surface Parking

Why this match