The Complete Guide to the Beatbot Sora Series

The Beatbot Sora series has three cordless robotic pool cleaners: the Sora 70, Sora 30, and Sora 10. The biggest difference is what each model actually cleans. The Beatbot Sora 70 is the only model in the series that cleans the water surface. The Sora 30 and Sora 10 focus on everything below the waterline. After that, the choice comes down to shallow-area coverage, debris capacity, and how hands-on you want the retrieval process to be.

Beatbot Sora 70 vs. 30 vs. 10

If you need water-surface cleaning, the Sora 70 is the only option in this series. If you do not, the Sora 30 and Sora 10 both cover floor, walls, waterline, and shallow platforms. The Sora 30 reaches shallower platforms (down to 8 inches versus 12 inches for the Sora 10) and has a larger 6L debris basket. The Sora 10 is lighter and recharges faster.

Do You Need Water Surface Cleaning?

This is the first question to answer. It separates the Sora 70 from the other two models completely.

Leaves, pollen, insects, and other debris land on the water surface first. If you clean them there, they never sink to the floor or break down in the water. The Beatbot Sora 70 handles this with JetPulse, a dual-jet system that pulls floating debris toward the filter rather than pushing it away. It can run in surface mode for up to 7 hours. You can also steer it remotely across the surface using the Beatbot app.

The Beatbot Sora 30 and Beatbot Sora 10 do not clean the water surface. Both models do float to the surface at the end of a cleaning cycle for easy pickup. That is retrieval, not surface cleaning. It means the robot comes to you so you do not have to reach into the water. It does not mean the robot is skimming the surface during the cleaning session.

If floating debris is a regular problem in your pool, the Sora 70 is the right path. If your pool stays mostly clear on top and the real issue is the floor, walls, and waterline, the Sora 30 or Sora 10 will cover what you actually need.

Which Beatbot Sora Model Fits Your Pool and Cleaning Pattern?

Sora 70 for Broader Cleaning Demands

The Beatbot Sora 70 robotic pool cleaner covers five zones: water surface, floor, walls, waterline, and shallow platforms down to 8 inches. It is the right choice for pools that collect floating debris regularly, whether from nearby trees, wind, or seasonal conditions. It also suits pool owners who want a single robot to handle the full cleaning workload without separate skimming steps.

The 6L debris basket handles more before it needs emptying. The 3-year warranty adds coverage that the other two models do not match. Remote surface control via the app means you can guide the robot manually when you want more precision.

Sora 30 for Buyers Who Want All-Area Underwater Cleaning

The Beatbot Sora 30 robotic pool cleaner covers floor, walls, waterline, and shallow platforms down to 8 inches. It does not clean the water surface. It is the right fit for pool owners who want complete underwater coverage and deeper shallow-area reach without paying for surface cleaning they would not use.

The Sora 30 has a 5L debris basket, a 10,000mAh battery, and an optional 3-micron ultra-fine filter for finer particle capture. It comes with a 2-year warranty and a 30-day return window.

Sora 10 for Buyers Focused on Core Cleaning Value

The Beatbot Sora 10 robotic pool cleaner covers floor, walls, waterline, and shallow platforms. It is the entry point into the Sora line. It is the right fit for pool owners whose main priority is dependable core cleaning in a lighter, faster-charging package.

The Sora 10 weighs 18.7 lbs and recharges in about 3.5 hours at 65W. At the end of every cleaning cycle, it moves to the waterline automatically and holds position for 10 minutes so you can lift it out without reaching into the pool. It carries a 2-year warranty and a 30-day return policy.

Pool Compatibility Across the Sora Series

All three Beatbot Sora models work in above-ground and in ground pools. They handle all common pool shapes, including rectangular, round, kidney, and freeform, and all standard pool materials: concrete, vinyl, fiberglass, and ceramic tile. All three are rated for saltwater pools with a salt concentration below 5,000 PPM.

Compare the Features That Actually Change the Decision

All three Sora models share 6,800 GPH suction. Suction power is not the deciding factor here. The differences that change ownership experience are coverage, basket size, battery, retrieval, and warranty.

Cleaning Coverage

The Sora 70 covers five zones. The Sora 30 and Sora 10 cover four. The missing zone on the Sora 30 and Sora 10 is the water surface. For underwater zones, all three models cover the same areas: floor, walls, waterline, and shallow platforms.

Shallow platform depth is where the Sora 30 and Sora 10 diverge. The Sora 30 reaches platforms as shallow as 8 inches. The Sora 10 reaches down to 12 inches. If your pool has a tanning ledge or beach entry shallower than 12 inches, only the Sora 70 or Sora 30 will reach it.

Filtration and Debris Basket Size

The Sora 70 has a 6L debris basket. The Sora 30 and Sora 10 both have 5L baskets. All three use a standard 150-micron filter. The Sora 70 and Sora 30 both support an optional 3-micron ultra-fine filter for capturing finer particles.

In practice, a larger basket means fewer stops to empty it mid-cycle. For pools with heavy leaf fall or significant daily debris, the Sora 70's 6L basket gives more uninterrupted cleaning time. For lighter debris loads, the 5L basket in the Sora 30 and Sora 10 is plenty.

Battery and Runtime

The Sora 70 and Sora 30 both run up to 4.5 hours for combined floor, wall, and waterline cleaning. The Sora 10 runs up to 4 hours for the same workload. For floor-only cleaning, all three deliver up to 5 hours. The Sora 70 adds up to 7 hours in surface mode on top of that.

The Sora 10 has a smaller 7,800mAh battery and recharges about an hour faster than the other two. For most residential pools, the runtime difference between the Sora 30 and Sora 10 is not meaningful. It becomes relevant in larger pools or when you want back-to-back cleaning sessions without waiting.

App Control, Retrieval, and Everyday Convenience

All three models connect to the Beatbot app via WiFi and Bluetooth. All three support offline control, OTA updates, cleaning scheduling, and water temperature monitoring.

The Sora 70 adds remote surface navigation. When the robot is on the water surface, you can steer it directly from the app. One-touch retrieval lets you call it to the surface at any point during or after a cleaning cycle.

The Sora 30 floats to the surface automatically at the end of a cycle. One-click parking sends it to the edge for pickup when it is already on the surface.

The Sora 10 parks at the waterline automatically when the cycle ends. It holds that position for 10 minutes. No command required.

Warranty and Return Policy

The Sora 70 comes with a 3-year warranty. The Sora 30 and Sora 10 both carry a 2-year warranty. All three include a 30-day return window. The longer warranty on the Sora 70 reflects its position as the most full-featured model in the series and lowers long-term ownership risk.

What to Check Before You Buy a Beatbot Sora Model

Check Your Main Debris Problem

Is most of your debris floating on the surface, settled on the floor, or both? If floating debris is a regular issue, only the Sora 70 addresses it directly. If your pool mostly deals with floor debris, wall buildup, and waterline staining, the Sora 30 or Sora 10 covers those zones.

Check How Shallow Your Pool's Platforms Are

If your pool has a tanning ledge, beach entry, or sun shelf shallower than 12 inches, only the Sora 70 and Sora 30 will reach those areas. The Sora 10 cleans platforms down to 12 inches. The Sora 70 and Sora 30 go down to 8 inches.

Check How Hands-On You Want to Be

The Sora 70 gives you the most control: remote surface navigation, one-touch retrieval on demand, and a 5-mode cleaning system. The Sora 30 automates retrieval at the end of a cycle with minimal input. The Sora 10 handles everything automatically and parks itself at the waterline when it is done. If you want to set the robot and come back when it is finished, the Sora 10 does that well.

Full Specs: Sora 70 vs. Sora 30 vs. Sora 10

FAQs

Which Beatbot Sora model cleans the water surface?

Only the Beatbot Sora 70. It uses JetPulse, a dual-jet system that actively pulls floating debris into the filter. The Sora 30 and Sora 10 do not clean the water surface.

Can Beatbot Sora cleaners work in above-ground and in ground pools?

Yes. All three models work in above-ground and in ground pools across all standard shapes and materials, including concrete, vinyl, fiberglass, and ceramic tile.

Do I need the app to use a Beatbot Sora cleaner?

No. All three Sora models support offline control. The app adds scheduling, monitoring, OTA updates, and surface remote control on the Sora 70, but it is not required for basic operation.

Is the optional 3-micron filter necessary for every pool?

No. The standard 150-micron filter handles everyday debris including leaves, sand, and insects. The 3-micron ultra-fine filter is useful if you want to capture finer particles or maintain especially clear water. It is an optional upgrade, not a required accessory.

Where can I find the Beatbot Sora user manual?

The user manual for each Sora model is available on the Beatbot website product page and included in the box. You can also find it through the Beatbot app after pairing your robot.

Which Sora model is best if I care most about runtime and debris capacity?

The Beatbot Sora 70. It has the largest debris basket at 6L and the longest total runtime when you include surface cleaning (up to 7 hours in surface mode, plus up to 4.5 hours for underwater cleaning). If you only need underwater cleaning, the Sora 30 matches the Sora 70's underwater runtime with a 5L basket.