The battery capacity is 13,400 mAh. Typically, the robot can be fully charged in about 4.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.

AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

AquaSense 2 Pro has efficient cleaning capabilities that can effectively remove passing garbage and algae. However, some algae are very slippery and have strong grip, AquaSense 2 Pro may not be able to remove them directly. In this case we suggest spreading algae removal agents in the water first. After the algae are deactivated, use our machine to remove them in conjunction with the swimming pool circulation system.

AquaSense 2 Pro is designed for swimming pools with a working depth in the range of 0.5–3 m and up to 0.4m for shallow end or Baja shelf.

AquaSense 2 Pro can work in a depth range of 0.5 to 3 meters. While most pool cleaning robots cannot clean steps, AquaSense 2 Pro/AquaSense can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.4 meters. We will also continue optimizing step-cleaning functions.

AquaSense 2 Pro can draw a pool map in most cases, but if the bottom and walls of your pool are curved, ultrasonic waves may be reflected upwards at the bend and cannot be received by the machine, so there is a possibility that it cannot be drawn in this situation

Users can remotely control the machine through the app, but only on the water surface

AquaSense 2 Pro can remotely return to the shore through the APP during the cleaning the water surface.

The battery capacity is 10000 mAh. Typically, the robot can be fully charged in about 3.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.

AquaSense 2 is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPMBut don't worry, we have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.

AquaSense 2 can clean the walls and water lines of infinity pools, but it cannot clean the water surface.

AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

AquaSense 2 is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense 2 can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.We will also continue to optimize the function of step cleaning, such as reducing the water depth limit, improving cleaning capabilities, etc. If you want to experience it, you only need to upgrade its firmware.If you have concerns, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.

0.5m-3m / 1.6ft-9.8ft

AquaSense 2 can switch modes in water or on shore through the app

AquaSense 2 cannot be controlled to return through the APP during the cleaning process

AquaSense 2 can automatically recognize obstacles and avoid them, the obstacle avoidance function of which is the same as AquaSense Pro

Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.

AquaSense Pro comes with a two-layer filter that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).

It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.

Aquasense Pro can complete water surface cleaning for up to 9.5 hours or pool bottom cleaning for up to 5 hours in a single charging cycle.The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.

AquaSense Pro can work with beach entry pools as long as the water depth is over 1.6ft, as AquaSense Pro is designed to operate within a depth range of 1.6ft to 9.8ft. If the water depth is less than 1.6ft, then the robot will return to the water of deep side.

No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.

Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.

Yes, it works on both in-ground and above ground pools.

The filter basket's capacity of AquaSense Pro is 3.7L.

AquaSense Pro is equiped with 10,400mAh battery and it requires only 3.5 hours for a full recharge. The charging time may longer when temperature is below 77℉.

Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.

It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.

AquaSense can support cleaning time of up to 3.5 hours in quick mode (bottom cleaning) and 2.5 hours in standard mode (bottom + walls cleaning). The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.

No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.

Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.

Yes, it works on both in-ground and above ground pools.

The filter basket's capacity of AquaSense is 2L.

AquaSense is equiped with 6700mAh battery and needs about 3hrs charging. The charging time may longer when temperature is below 77℉.

Currently, the device's networking WiFi only supports 2.4GHz. Dual-band WiFi that supports both 5GHz and 2.4GHz is also compatible. If your home WiFi is currently set to 5GHz only, you can contact your router service provider to enable 2.4GHz.

The Beatbot iSkim Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more.

iSkim Ultra is suitable for use in saltwater pools. Beatbot takes into account the presence of salt and chlorine in the water when designing its products. We use highly corrosion-resistant materials and processes to ensure the durability of our products. Our product can be safely used in saltwater with a concentration not exceeding 5000 ppm and a chlorine content not higher than 4 ppm.

Yes, iSkim Ultra can work well with Infinity pool.

iSkim Ultra is highly effective in removing hair, leaves, branches, flowers, grass, seeds, pollen, and other vegetation, as well as small insects or animals. It can filter debris as small as 380 micrometers (μm).

The iSkim Ultra comes equipped with a magnetic wireless charger. Using this charger, it takes approximately 5 hours to fully charge. Additionally, our device features a solar panel, allowing for convenient solar charging.

Please rest assured that our product has a wide voltage and can adapt to 100V to 240V.

The filter basket's capacity of iSkim Ultra is 9L.

Yes, you can easily maneuver the machine to move the robot forward, backward, left, and right based on your preferences.