Robotic Pool Cleaner
Beatbot AquaSense® 2 Ultra Robotic Pool Cleaner
The World's First AI-Powered 5-in-1 Robotic Pool Cleaner
$3,150.00 $3,550.00
Beatbot AquaSense® 2 Pro Robotic Pool Cleaner
The Industry-Leading 5-in-1 Robotic Pool Cleaner
$2,199.00 $2,899.00
Beatbot AquaSense® 2 Robotic Pool Cleaner
The World's First 3-in-1 Robotic Pool Cleaner with Water Surface Parking
$1,099.00 $1,599.00
Beatbot AquaSense® Pro Robotic Pool Cleaner
The World's First 5-in-1 Intelligent Pool Cleaning Robot
Beatbot iSkim® Ultra Robotic Pool Skimmer
Solar-Powered Intelligent
Product Parameters
For AquaSense 2 Ultra
For AquaSense 2 Pro
For AquaSense 2
For AquaSense Pro
For AquaSense
For iSkim Ultra
AquaSense 2 Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steels and more.
AquaSense 2 Ultra is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPM. We have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 Ultra is a home swimming pool cleaner that can clean pools with an area of up to 320 square meters (3,444 square feet) in a single cycle. If your pool is larger than this, it can still be cleaned, but the process may take more than one cycle. When the battery power drops below 15%, the robot will resurface next to the pool edge, you need to recharge it untill it can continue cleaning, and place the robot near the area of the pool that has not been cleaned yet.
AquaSense 2 Ultra comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Ultra is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense Ultra can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.If you have concerns or want to reduce the water depth limit, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
AquaSense 2 Ultra will clean corners during edge exploration and planned cleaning.
Up to 10 hours Continuous Runtime for Surface CleaningUp to 5 hours Continuous Runtime for Floor CleaningUp to 4.5 hours Continuous Runtime for Walls + Waterline Cleaning
The battery capacity of the AquaSense 2 Ultra is 13400mAh，but the AquaSense 2 Ultra only take 4.5h to fully charge.
AquaSense 2 Ultra supports Dual Connectivity - 5G/2.4G WiFi or 2.4G Bluetooth
Users can remotely control AquaSense 2 Ultra and switch modes through the app, but only when operating on the water surface
AquaSense 2 Ultra use a Clarifying Agent Kit which is the same as the previous ones.
The battery capacity is 13,400 mAh. Typically, the robot can be fully charged in about 4.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro comes with a two-layer filter (150μm+250μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 Pro has efficient cleaning capabilities that can effectively remove passing garbage and algae. However, some algae are very slippery and have strong grip, AquaSense 2 Pro may not be able to remove them directly. In this case we suggest spreading algae removal agents in the water first. After the algae are deactivated, use our machine to remove them in conjunction with the swimming pool circulation system.
AquaSense 2 Pro is designed for swimming pools with a working depth in the range of 0.5–3 m and up to 0.4m for shallow end or Baja shelf.
AquaSense 2 Pro can work in a depth range of 0.5 to 3 meters. While most pool cleaning robots cannot clean steps, AquaSense 2 Pro/AquaSense can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.4 meters. We will also continue optimizing step-cleaning functions.
AquaSense 2 Pro can draw a pool map in most cases, but if the bottom and walls of your pool are curved, ultrasonic waves may be reflected upwards at the bend and cannot be received by the machine, so there is a possibility that it cannot be drawn in this situation
Users can remotely control the machine through the app, but only on the water surface
AquaSense 2 Pro can remotely return to the shore through the APP during the cleaning the water surface.
The battery capacity is 10000 mAh. Typically, the robot can be fully charged in about 3.5 hours. However, if the temperature is below 77 ℉ (25 °C), the charging time may be longer.
AquaSense 2 is capable of cleaning saltwater pools. As long as the concentration of saltwater is required to be below 5000PPMBut don't worry, we have fully considered the saltwater environment in our product design. After our research, almost all household swimming pools will not exceed this limit.
AquaSense 2 can clean the walls and water lines of infinity pools, but it cannot clean the water surface.
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 comes with a two-layer filter (150μm) that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
AquaSense 2 is a pool cleaning robot that can work in a depth range of 1.31 to 9.84ft. While most pool cleaning robots cannot clean steps, AquaSense 2 can clean steps if the steps are wide enough to support cleaning operations and the water depth on the steps is greater than 0.98 ft.We will also continue to optimize the function of step cleaning, such as reducing the water depth limit, improving cleaning capabilities, etc. If you want to experience it, you only need to upgrade its firmware.If you have concerns, you can provide the parameters of the step size and water depth, and we can ask the completion staff to give you an accurate reply.
0.5m-3m / 1.6ft-9.8ft
AquaSense 2 can switch modes in water or on shore through the app
AquaSense 2 cannot be controlled to return through the APP during the cleaning process
AquaSense 2 can automatically recognize obstacles and avoid them, the obstacle avoidance function of which is the same as AquaSense Pro
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
AquaSense Pro comes with a two-layer filter that can effectively capture debris of all sizes, including leaves, hair, sand, insects, and more. It can filter particles as small as 150 micrometers (μm).
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
Aquasense Pro can complete water surface cleaning for up to 9.5 hours or pool bottom cleaning for up to 5 hours in a single charging cycle.The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
AquaSense Pro can work with beach entry pools as long as the water depth is over 1.6ft, as AquaSense Pro is designed to operate within a depth range of 1.6ft to 9.8ft. If the water depth is less than 1.6ft, then the robot will return to the water of deep side.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense Pro is 3.7L.
AquaSense Pro is equiped with 10,400mAh battery and it requires only 3.5 hours for a full recharge. The charging time may longer when temperature is below 77℉.
Yes, our robot can be safely used in salt water with a concentration not exceeding 5000 ppm. The concentration of salt in most home swimming pools does not exceed the above concentrations.
It is suitable for swimming pools of various shapes and made of vinyl, fiberalass, ceramic or other materials.
AquaSense can support cleaning time of up to 3.5 hours in quick mode (bottom cleaning) and 2.5 hours in standard mode (bottom + walls cleaning). The above data are the test results of Beatbot laboratory, and the details are always subject to the actual operating environment.
No need to dry the robot, as long as there is no excess salt in the pool water and the pH is neutral, if not please ranise the robot first.
Yes, the robot can work without WI-Fi. The modes on the robot can cover the cleaning of all areas, please check and select the corresponding mode before starting.
Yes, it works on both in-ground and above ground pools.
The filter basket's capacity of AquaSense is 2L.
AquaSense is equiped with 6700mAh battery and needs about 3hrs charging. The charging time may longer when temperature is below 77℉.
Currently, the device's networking WiFi only supports 2.4GHz. Dual-band WiFi that supports both 5GHz and 2.4GHz is also compatible. If your home WiFi is currently set to 5GHz only, you can contact your router service provider to enable 2.4GHz.
The Beatbot iSkim Ultra is suitable for various shapes and pool materials, including underground and above-ground pools made of concrete, vinyl, fiberglass, ceramic tiles, stainless steel, and more.
iSkim Ultra is suitable for use in saltwater pools. Beatbot takes into account the presence of salt and chlorine in the water when designing its products. We use highly corrosion-resistant materials and processes to ensure the durability of our products. Our product can be safely used in saltwater with a concentration not exceeding 5000 ppm and a chlorine content not higher than 4 ppm.
Yes, iSkim Ultra can work well with Infinity pool.
iSkim Ultra is highly effective in removing hair, leaves, branches, flowers, grass, seeds, pollen, and other vegetation, as well as small insects or animals. It can filter debris as small as 380 micrometers (μm).
The iSkim Ultra comes equipped with a magnetic wireless charger. Using this charger, it takes approximately 5 hours to fully charge. Additionally, our device features a solar panel, allowing for convenient solar charging.
Please rest assured that our product has a wide voltage and can adapt to 100V to 240V.
The filter basket's capacity of iSkim Ultra is 9L.
Yes, you can easily maneuver the machine to move the robot forward, backward, left, and right based on your preferences.
How to Choose the Best Inground Pool Vacuum Cleaner
In-ground pools have unique characteristics and challenges that require a proper cleaning solution. In-ground pool vacuums are an effective way to address these issues and ensure that your pool water is clean. Understanding the construction of in-ground pools, the challenges they present during cleaning, and the solutions that vacuums can provide is key to choosing the right cleaning tool. This information will help you select the best tool from the many options.
Pain Points of In-Ground Pool Maintenance
Debris Accumulation
Because in-ground pools are low-lying and often surrounded by landscaping, they are more susceptible to debris accumulation. Leaves, insects, dust or branches can sink to the bottom of the pool or cling to the walls, clogging filters and causing the water to become cloudy. If heavy debris such as pebbles or acorns are not removed promptly, it can strain the pump, reduce system efficiency or even cause damage.
Algae and Stains Accumulation
The permanent structure of an in-ground pool makes it prone to algae growth in warm climates or shaded areas. Algae and stains on the walls or bottom of the pool are difficult to remove with standard filtration and may breed bacteria, threatening water safety. A thorough cleaning is necessary to restore the pool's appearance and sanitation.
Time and Labor Intensity
Cleaning an in-ground pool takes a long time, and manual cleaning usually takes 1 to 3 hours per week. The size, depth and areas such as corners or waterlines of the pool require meticulous attention, which is a physically intensive task for owners with limited time or energy.
Equipment Wear and Tear
Debris and algae can add stress to filtration systems, overloading pumps and increasing energy costs. Clogged filters can restrict water flow and may cause pump burnout or require expensive repairs. Regular cleaning is essential to reduce equipment wear and tear and maintain system performance.
Functions of Inground Pool Vacuum Cleaners
Manual Vacuum Cleaners
Do you prefer to have a hand-on experience and control every detail of your pool cleaning? Inexpensive hand vacuums range from around $50 to $200 and include a vacuum head, hose, and telescopic pole that attach to your pool's skimmer. They use the suction force of a water pump to clean the pool's bottom, walls, and corners. These devices allow you to clean specific spots like stairs or nooks, which is suitable for smaller pools (less than 20,000 gallons) , if you are willing to dedicate some time every week. These robots are quite effective when it comes to cleaning light debris like dust or small leaves. It takes 20–40 minutes for every cleaning cycle, which might be a bit tough for u to clean a big pool.
Suction-Side Vacuum Cleaners
For a balance between manual work and cost control, suction vacuums work nicely and will set you back between $100 and $500. They hook up to a skimmer or suction line and use the power of the water pump to automatically clean the bottom and parts of the pool walls. They are simple to set up and best for medium pools with light to moderate debris (like leaves or sand). You can set them up quickly and leave them to do their job. Still, they can be overwhelmed by larger debris, and without regular cleaning of your filter, they can cause damage to your system.
Pressure-Side Vacuum Cleaners
Want to go a step further? Pressure-side vacuums, priced from $200 to $800, attach to your pool’s return line and utilize the pressure of the water to push them along and into a filter bag. They are especially useful for big debris, such as twigs or acorns. Many models include brushes to lighten the load on your filter. If your pool is in an area with trees or high winds, they work for medium- to large-sized pools too. However, some models will need a booster pump too to the package, which increases the price.
Robotic Vacuum Cleaners
If you’re an on-the-go type with minimal interest in doing the job yourself, a robot vacuum is the way to go, ranging in price from $500 to $3,500. Equipped with their own pumps, filters, and navigation systems, these high-tech devices can clean the bottom, walls, waterline and even the water sueface of your pool autonomously. Most have app controls or timers, so you can just set when you want them to clean. Take the Beatbot AquaSense 2 series, which is cordless, and equipped with intelligent navigation to remove algae, fine dirt, and larger debris thoroughly.
How to Choose the Right Inground Pool Vacuum Cleaner
Match Your Pool’s Needs
Consider your pool’s size, surface, and debris type. Small, smooth-surfaced pools suit manual or suction-side cleaners. Larger pools or those with concrete surfaces benefit from robotic or pressure-side models. Heavy debris or algae requires cleaners with strong suction or scrubbing capabilities, like the Beatbot AquaSense 2 Series.
Balance Time and Budget
Manual and suction-side cleaners are cost-effective but demand more time. Robotic cleaners save effort but have higher upfront costs. Pressure-side cleaners offer a balance but may need additional equipment. Ensure compatibility with your pool’s plumbing and water type (chlorine or saltwater).
Prioritize Durability and Efficiency
Choose cleaners with rust-proof materials like stainless steel or heavy-duty plastic. Robotic models should have IP68 waterproof ratings and safety features like auto-shutoff. Opt for energy-efficient designs to minimize water or electricity use, reducing environmental impact.