Why Does Your Beatbot Battery Run Out Faster? Here's the Explanation and Solutions

Beatbot is dedicated to serving you with quality products that can significantly improve your swimming pool experience. We have recently been receiving feedback from our customers regarding the AquaSense Series related to battery life. Some users claim the battery drains more quickly than anticipated. In this article, we look at why this is the case and offer some tips to improve your device experience.

Battery life varies widely with water temperature, debris load and pool size. Colder water raises the internal resistance of the battery, decreasing its efficiency and total capacity. The cleaner can pull more power if the pool has a lot of debris, or pests, or is an unusual shape that causes the cleaner to work harder. The device may struggle with those as well and also become more energy consuming if the pool has sharp edges and other angularities.

More frequent or particularly long cleaning cycles might increase battery usage. Using the highest cleaning mode for long periods will naturally consume more energy than standard modes. What you do not realize is that repeated usage of the device several times a day without the battery cooling down would be causing your device to drag out life. Each pool is different, and finding the right balance between cleaning efficiency and battery life is crucial for optimal performance.

AquaSense Series rechargeable batteries, for example, should be given proper maintenance to not lose your charge over time. Putting the device unused for long periods and not charging will make the battery enter a deep discharge state, which will make it harder to be charged and will also have an impact on the overall capacity of the battery. However, over-charging or constantly using the device without fully charging the battery can also affect its lifespan. Proper care and routine maintenance of your device's battery can help enhance its overall performance and longevity.

If the firmware is out-of-date, your device’s performance might be less than optimal, resulting in excess battery consumption. Firmware updates include patches and optimizations which can improve battery performance and the performance of the device in general. Keeping your device up to date with the latest software is a simple but effective way to boost its efficiency and battery life.

Use the cleaner on settings appropriate for your pool’s size and condition. A shorter cycle may be sufficient for routine maintenance. Consider scheduling cleaning sessions during off-peak times to reduce the workload on the device. If your pool is fairly clean, don’t run it on the highest cleaning settings because this will affect battery life. The frequency of cleaning you need will differ so we recommend finding the right cleaning routine for your particular pool to get the best performance out of your Beatbot AquaSense Series.

After every use, clean the filters and brushes. Clogged filters make the device work harder and use more energy. Replace worn-out parts and check for any damage on the device to ensure that it gives peak performance. Regular maintenance not only aids the maintaining of battery life but also makes sure your device runs as smoothly as possible.

Before using each time, full charge the battery but avoid overcharging. Keep the device in a cool and dry place when not in use to maximize battery health. Make sure to always use the original Beatbot charger under the warranty as a non-compatible charger may damage the battery. Adopting proper charging practices can not only help keep the battery healthy but also prolong the lifespan of the device.

Please visit our website to see if there are any firmware updates available. Usually, the new updates are optimized for efficiency and better battery performance. Then make sure to update the device to benefit from the latest enhancements and bug fixes. Getting updated with the latest version of the software is an easy way to keep your device running well and efficiently.

Beatbot AquaSense Series is intended for use only on pools that are pre-skimmed to help remove large debris from the surface (larger than the size of a quarter). This puts less pressure on the device and prevents it from clogging up. Additionally, do not operate the device during busy times at the pool, as that can cause it to use charge more quickly, due to water being more agitated and potential debris being disturbed. As such, proper usage of the device can be beneficial for minimizing excess pressure on the battery and subsequently, efficient performance.

If your device's battery life remains noticeably shorter despite following these tips, please contact our customer support team at service@beatbot.com or call us at (833) 702-4399. We’re here to help diagnose or replace bad batteries as necessary. If convenient, you can provide detailed information with us about your device's usage patterns and maintenance routine so that our support team can diagnose and resolve the issue more effectively.

Customer service is Beatbot's top priority and we are always trying to improve our products. Knowing these factors and these tips will help you to ensure that your AquaSense robot delivers optimal performance. We’re sure that with a little time and care, your device will keep providing the reliable service you expect.

Relative Blogs

About the author